773516 BALL BEARING SINGLE THRUST, WITH FLAT SEAT NO.51115

773516 BALL BEARING SINGLE THRUST, WITH FLAT SEAT NO.51115
规格参数 参数值
IMPA编码 773516
产品单位 PCE
产品规格 Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or shaft washer while that attached to the housing is called the outer ring or housing washer. In double direction thrust ball bearings, there are three rings with the central one being fixed to the shaft. Single direction and double direction thrust ball bearings can support thrust loads in one or both directions respectively. There are also thrust ball bearings with an aligning seat washer beneath the outer ring in order to compensate for shaft misalignment or mounting errors. Pressed-steel cages are usually used in the smaller bearings and machined cages are generally used in the larger ones. Series 51100
中文汉化 773516 球面单向推力轴承，带有51115号平座单向推力轴承由带球道槽的类似垫圈的轴承环组成。安装在轴上的环称为内圈或轴垫圈，安装在机壳上的称为外圈或机壳垫圈。双向推力轴承有三个环，其中央一个固定在轴上。单向和双向推力轴承分别可以承受一个或两个方向的推力载荷。还有在外圈下方带有对中座垫圈的推力轴承，用于补偿轴偏斜或安装误差。较小的轴承通常使用冲压钢保持架，较大的轴承通常使用切削加工保持架。系列51100
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.