753201 REGULATOR PRESSURE WITH, FURTHER DETAIL

753201 REGULATOR PRESSURE WITH, FURTHER DETAIL
规格参数 参数值
IMPA编码 753201
产品单位 PCE
产品规格 Condensing pressure regulator: Used to maintain a constant and sufficiently high condenser – and receiver pressure in refrigeration and air conditioning plants with air-cooled condensers. Evaporating pressure regulator: To be mounted in the suction line after the evaporator. Used to maintain a constant evaporating pressure and thereby a constant surface temperature on the evaporator. Also, regulators protect against too low an evaporating pressure. The regulator closes when the pressure in the evaporator falls below the set value. Crankshaft pressure regulator: To be fitted in the suction line ahead of the compressor. Protects the compressor motor against overload during start-up after long standstill periods or after defrost periods.
中文汉化 753201 压力调节器,更详细描述 冷凝压力调节器：用于带有空气冷却冷凝器的制冷和空调装置中，保持恒定且足够高的冷凝器-接收器压力。 蒸发压力调节器：安装在蒸发器后的吸气管路中。 用于保持恒定的蒸发压力，从而保持蒸发器表面温度恒定。 同时，调节器还能防止蒸发压力过低。 当蒸发器内的压力低于设定值时，调节器会关闭。 曲轴压力调节器：安装在压缩机前的吸气管路中。 在长时间停机后启动或除霜后，保护压缩机电机免受过载。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.