792629 BATTERY NICKEL-CADMIUM ALCAD, LCE90P 90AH

792629 BATTERY NICKEL-CADMIUM ALCAD, LCE90P 90AH
规格参数 参数值
IMPA编码 792629
产品单位 PCE
产品规格 Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
中文汉化 792629 电池 锂镍镉 ALCAD, LCE90P 90Ah Alcad的坚固镍镉袖珍板技术特别适合在艰难苛刻的条件、遥远难以到达的地点的安装中，满足复杂的性能要求。 <工业应用的灵活性> Alcad单个镍镉(Ni-Cd)电池为对可靠性能至关重要的行业提供了灵活性，即使在极端操作条件下，例如：•炼油厂•发电站•陆上和海上石油与天然气应用•变电站•机场•建筑基础设施<备用电源应用的可靠性> 当主要电源失效时，Alcad电池能确保您的备份系统为关键系统提供支持，以维持运营直至主电源恢复或可以执行控制关机，包括：•不间断电源(UPS)•开关和传输•紧急和安全•工业火灾监控器和警报•过程控制•变电站开关设备•信号灯<启动应用的安全性> 对于发电机启动或在紧急情况下切换加热器、泵和其他重要设备，Alcad电池能满足特定的高放电需求，即时电压恢复，即使在极端温度下也能可靠运行。LCE系列具有最厚的极板，专为电池需要在相对较长的放电期间提供可靠能量来源的应用设计。通常，电流相对于储存的能量来说相对较低，而且放电频率通常较低。典型用途包括备用电源、通信和批量能量存储。容量范围：10Ah-375Ah。<标准布局> Alcad已经开发了一系列标准布局，客户可以根据这些布局订购电池。无论电池是安装在架子上、柜子里还是独立放置，都可以应用相同的配置原则。推荐充电电压：对于两阶段充电：•浮充级：LCE的每个电池为1.42±0.01V•高充级：LCE为1.47-1.70V，高电压将提高再充电的速度和效率。对于单阶段充电：1.43-1.50V/个。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.