792641 BATTERY NICKEL-CADMIUM ALCAD, LCE185P 185AH

792641 BATTERY NICKEL-CADMIUM ALCAD, LCE185P 185AH
规格参数 参数值
IMPA编码 792641
产品单位 PCE
产品规格 Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
中文汉化 792641 电池镍镉 ALCAD, LCE185P 185Ah Alcad的坚固的镍镉袖珍板技术特别适合于在艰难苛刻和偏远难以到达的环境中的安装设备的复杂要求。 <工业的多功能性> Alcad单个单元镍镉(Ni-Cd)电池为对性能有严格要求的工业提供了灵活性，即使在极端运行条件下，例如：•炼油厂•发电站•陆上和海上石油及天然气应用•变电站•机场•建筑基础设施<备用电源应用的可靠性> 当主要电源失效时，Alcad电池能够使您的备份系统在恢复主电源或执行控制关闭之前，为关键系统提供支持，包括：•不间断电源(UPS)•开关和传输•紧急和安全•工业火灾监测器和报警•过程控制•变电站开关设备•信号灯 <启动应用的安全性> 对于发电机启动或在紧急情况下切换加热器、泵和其他重要设备，Alcad电池满足了特定的高放电、即时电压恢复和可靠运行的需求，即使在极端温度下也是如此。LCE系列具有最厚的极板，专为需要电池在相对较长的放电期间提供可靠能源的应用设计。 通常，相对于储存的能量，电流相对较低，并且放电通常是不频繁的。典型用途包括备用电源、通信和大量能量存储。容量范围：10Ah - 375Ah。<标准布局> Alcad已经开发了一系列标准布局，可以在这些布局中订购电池。无论电池是安装在机架上、柜子里还是仅独立放置，都可以应用相同的配置原则。推荐充电电压：对于两阶段充电：•浮充水平：LCE为1.42±0.01V/单元•高充水平：LCE为1.47-1.70V/单元，高电压将增加再充电的速度和效率。对于单阶段充电：1.43-1.50V/单元。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.