792642 BATTERY NICKEL-CADMIUM ALCAD, LCE200P 200AH

792642 BATTERY NICKEL-CADMIUM ALCAD, LCE200P 200AH
规格参数 参数值
IMPA编码 792642
产品单位 PCE
产品规格 Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
中文汉化 792642 电池 锂镉电池 LCE200P 200Ah Alcad公司的坚固镍镉便携式平板技术特别适合于在艰难苛刻的条件、遥远或难以到达的地点的安装的复杂需求。 <工业应用的灵活性> Alcad单个单元镍镉（Ni-Cd）电池为工业提供了关键性能的灵活性，即使在极端操作条件下，例如在：•炼油厂•发电厂•陆上和海上石油与天然气应用•变电站•机场•建筑基础设施 <备用电源应用的可靠性> 当主要电源失效时，Alcad电池能够使您的备份系统为保持运营提供重要支持，直到主电源恢复或可以执行控制关机，包括：•不间断电源（UPS）•开关和传输•应急和安全•工业火灾监视器和警报•过程控制•变电站开关设备•信号指示 <启动应用的安全性> 对于发电机启动或在紧急情况下切换加热器、泵和其他关键设备，Alcad电池满足了特定的高放电、即时电压恢复和可靠运行的需求，即使在极端温度下也是如此。LCE系列具有最厚的极板，设计用于需要电池在相对较长的放电期间提供可靠能源的应用。通常，电流相对于储存的总能量来说相对较低，并且放电通常是不频繁的。典型用途包括备用电源、通信和大规模能量存储。容量范围：10 Ah - 375 Ah。 <标准布局> Alcad已经开发了一系列标准布局，您可以通过这些布局订购电池。无论电池是安装在机架上、柜子里还是仅独立放置，都可以应用相同的配置原则。推荐充电电压：对于两阶段充电：•浮充水平：LCE为1.42 ± 0.01 V/单元•高充水平：LCE为1.47 - 1.70 V/单元，高电压会增加再充电的速度和效率。对于单阶段充电：1.43 - 1.50 V/单元。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.