792647 BATTERY NICKEL-CADMIUM ALCAD, LCE300P 300AH

792647 BATTERY NICKEL-CADMIUM ALCAD, LCE300P 300AH
规格参数 参数值
IMPA编码 792647
产品单位 PCE
产品规格 Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
中文汉化 792647 电池类型：镍镉合金, LCE300P, 300Ah 阿尔卡德坚固的镍镉口袋板技术特别适合于在艰难苛刻、偏远难以到达的安装环境中的复杂需求。 <工业应用的灵活性> 阿尔卡德单体镍镉（Ni-Cd）电池为对性能可靠性要求极高的工业应用提供了灵活性，尤其是在炼油厂、发电站、陆上和海上石油与天然气应用、变电站、机场、建筑基础设施等领域。 <备用电源应用的可靠性> 当主电源失效时，阿尔卡德电池能够支持关键系统运行，直到主电源恢复或执行可控关闭，适用于：•不间断电源（UPS）•开关和传输•应急和安全•工业火灾监控器和报警•过程控制•变电站开关设备•信号指示 <启动应用的安全性> 对于紧急情况下发电机启动、加热器、泵等重要设备的切换，阿尔卡德电池满足了高放电、即时电压恢复和可靠操作的特殊需求，即使在极端温度下也能工作。LCE系列具有最厚的极板，专为电池需要提供相对较长时间放电期间可靠能量来源的应用设计。通常，相对于储存的能量，电流较低且放电较少。典型用途包括备用电源、通信和大量能量存储。容量范围：10Ah-375Ah。 <标准布局> 阿尔卡德已经开发了一系列标准布局，可以根据这些布局订购电池。无论电池是安装在机架上、柜子中还是独立放置，都可以应用相同的配置原则。推荐充电电压：对于两阶段充电：•浮充水平：LCE的每个电池为1.42±0.01V•高充水平：LCE为1.47-1.70V，高电压可以提高再充电的速度和效率。对于单阶段充电：1.43-1.50V/个电池。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.