792648 BATTERY NICKEL-CADMIUM ALCAD, LCE330P 330AH

792648 BATTERY NICKEL-CADMIUM ALCAD, LCE330P 330AH
规格参数 参数值
IMPA编码 792648
产品单位 PCE
产品规格 Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.
中文汉化 792648 电池镍镉ALCAD, LCE330P 330AH Alcad的坚固的镍镉袖珍板技术特别适合于在困难和苛刻条件下的安装，以及遥远和难以到达的位置。 <工业的多功能性> Alcad单个单元镍镉(Ni-Cd)电池为工业提供了关键性能的多功能性，即使在极端操作条件下，例如：•炼油厂•发电厂•陆上和海上石油与天然气应用•变电站•机场•建筑基础设施 <备用电源应用的可靠性> 当主要电源失效时，Alcad电池使您的备份系统能够为保持运营提供重要系统的支持，直到恢复主要电源或可以执行受控关闭，包括：•不间断电源(UPS)•开关和传输•应急和安全•工业火灾监视器和报警•过程控制•变电站开关设备•信号<启动应用的安全性> 对于发电机启动或在紧急情况下切换加热器、泵和其他关键设备，Alcad电池满足了对高放电、即时电压恢复和可靠运行的特定需求，即使在极端温度下也是如此。LCE系列具有最厚的极板，设计用于需要电池在相对较长的放电期间提供可靠能源的应用。通常，电流相对于储存的总能量来说相对较低，而且放电通常不频繁。典型用途包括备用电源、通信和批量能量存储。容量范围：10Ah - 375Ah。<标准布局> Alcad已经开发了一系列标准布局，其中可以订购电池。无论电池是安装在机架上、柜子里还是简单地独立放置，都可以应用相同的配置原则。推荐充电电压：对于两阶段充电：•浮充级：LCE每个电池1.42 ± 0.01 V•高充级：LCE为1.47 - 1.70 V，高电压将增加再充电的速度和效率。对于单阶段充电：1.43 - 1.50 V/电池。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.