330910 TESTING DEVICE FOR INFRARED, SPOT TYPE FLAME DETECTOR

330910 TESTING DEVICE FOR INFRARED, SPOT TYPE FLAME DETECTOR
规格参数 参数值
IMPA编码 330910
产品单位 PCE
产品规格 An operation-testing device for infrared spot type flame detector. The testing device is capable of providing 2 ranges of emission of spectrums that are required to operate infrared flame detector: the spectrum similar to CO2 spikes immersion region by using an infrared filters over a source and the flickering similar to a flame by using a flashing lamp. Available two type of testing methods depends upon the testing site environments. (a) Using the Test Initiation Switch (Normally use in this method), or (b) Using the Manual Test Switch (use this method if the (a) is not possible). This testing device is mandated to calibrate at every 10 years. The testing rod (Total length : 3,990 mm) is sold separately.
中文汉化 330910 红外点型火焰探测器的操作测试装置 一种红外点型火焰探测器的操作测试设备。 测试设备能够提供两种红外火焰探测器运行所需光谱范围：通过红外滤镜在光源上模拟二氧化碳尖峰浸没区域的光谱，以及使用闪烁灯模拟火焰闪烁的光谱。 根据测试环境，提供两种测试方法：(a) 使用测试启动开关（通常使用此方法）或(b) 如果(a)不可行，则使用手动测试开关。 这种测试设备必须每十年校准一次。 测试棒（总长度：3,990毫米）单独出售。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.