211137 TAIL MOORING WITH FURTHER, DETAIL

211137 TAIL MOORING WITH FURTHER, DETAIL
规格参数 参数值
IMPA编码 211137
产品单位 LN
产品规格 When using mooring ropes, there is a general desirability for the additional elasticity provided by mooring tails. The additional elasticity reduces the loads induced in wire mooring lines under dynamic loadings by permitting the ship to respond more favorably to various combinations of wind, wave and current, as well as to ships passing at slow speeds in close proximity. Tails also tend to distribute the loadings more evenly in the mooring lines in the same service. The additional elongation of the mooring line system permitted by the tail reduces the risk associated with poor line tending and the frequency and precision of line tending, particularly in berths where large tidal variations in high loading- unloading rates. Tails are also valuable at berths having short breast or spring leads as they provide the same effect as a longer all wire line. And lastly, they facilitate the handling of wire lines by boatman and mooring gangs.
中文汉化 211137 尾缆及详细说明 在使用系泊绳索时，通常希望提供额外的弹性，即尾缆。这种额外的弹性使得船舶在风、浪和流的组合以及低速接近的船舶影响下，能更好地响应动态载荷，从而降低钢丝系泊绳索在这些情况下的负荷。尾缆还有助于在相同服务条件下，更均匀地分配系泊绳索上的负荷。 尾缆允许的系泊绳系统额外伸长，降低了由于绳索护理不良（如张力不均）导致的风险，特别是在高装卸率且潮汐变化大的码头，对绳索护理的频率和精确性要求更高。 对于胸缆或弹簧铅较短的码头，尾缆也具有价值，它们提供了与较长的全钢丝线相同的效果。 最后，尾缆还便于船夫和系泊人员处理钢丝绳。
物料版本

以上内容为自动翻译的内容，仅供参考

This content is automatically translated and is for reference only.